I should have RTFHP first! In the Detail section, it says:
In multiple figure mode, frame will advance to the next figure. It takes two
calls to frame to skip a figure: the first goes to the next figure, and the
second call skips to the figure after that.
Duh...
Andy
-----Original Message-----
From: Naomi Altman [mailto:naomi@stat.psu.edu]
Sent: Friday, November 15, 2002 9:16 AM
To: Liaw, Andy
Subject: Re: [S] frame() not advancing
I have encountered this, and I believe it is correct behavior of frame
(although annoying) if you read the documentation - frame advances to the
next frame. To skip a frame, you want to advance twice.
At 10:47 PM 11/14/2002 -0500, you wrote:
>Dear S-news,
>
>A colleague of mine had found the following problem in Splus Professional
>6.0.2 release 1 for Windows: When setting, e.g.,
>
>par(mfrow=c(2, 2))
>
>using just one call to frame() does not advance to the next plot, but two
>calls will. Has anyone experience this problem?
>
>Cheers,
>Andy
>
>
>---------------------------------------------------------------------------
---
>Notice: This e-mail message, together with any attachments, contains
>information of Merck & Co., Inc. (Whitehouse Station, New Jersey, USA)
>that may be confidential, proprietary copyrighted and/or legally
>privileged, and is intended solely for the use of the individual or entity
>named on this message. If you are not the intended recipient, and have
>received this message in error, please immediately return this by e-mail
>and then delete it.
>
>===========================================================================
===
>
>--------------------------------------------------------------------
>This message was distributed by s-news@lists.biostat.wustl.edu. To
>unsubscribe send e-mail to s-news-request@lists.biostat.wustl.edu with
>the BODY of the message: unsubscribe s-news
Naomi S. Altman 814-865-3791 (voice)
Associate Professor
Dept. of Statistics 814-863-7114 (fax)
Penn State University 814-865-1348 (Statistics)
University Park, PA 16802-2111
------------------------------------------------------------------------------
Notice: This e-mail message, together with any attachments, contains
information of Merck & Co., Inc. (Whitehouse Station, New Jersey, USA) that may
be confidential, proprietary copyrighted and/or legally privileged, and is
intended solely for the use of the individual or entity named on this message.
If you are not the intended recipient, and have received this message in error,
please immediately return this by e-mail and then delete it.
==============================================================================
|